Accuracy

0.5class,0.2class

Input

Nominal value

Current :AC,DC 1A,5A;

Voltage: AC,DC 100V,300V,500Vand so on

Overload

Continual 1.2 times, Instantaneous current 10 times/5s;Instantaneous voltage 2 times /30s

Absorbed power

≤0.3VA(Current input);Voltage input≤0.3VA(100V),≤0.6VA(300V),≤1VA(500V)

Frequency

50±5Hz,60±5Hz

Output

Nominal value

DC:4-20mA,0-20mA, 0-5V, 0-10Vand so on

Load Resistance

Current output ≤600Ω

Voltage output ≥1000Ω

Ripple content

<0.5% peak value

Response time

≤400ms

Power supply

Voltage

AC85-265V/DC100-350V/DC24V/DC48V

Power

AC current, Voltage class ≤3VA,

Power Class ≤4VA

Insulation Resistance

≥100MΩ

Isolation voltage

(Among input//output//power supply)2.0kV/1min,50Hz

Temperature coefficient

0.5class≤200ppm/℃; 0.2class≤100ppm/℃

E  Environment

Temperature

Working:-10℃～+55℃ Storage:-25℃～+70℃

Humidity

≤90%RH,(In the place without dew and corrosive gas)

Altitude

≤2000m

Installation

(TS35 rail mounting, or attached with screws in of the cabinet)

Current Transmitter

BD-AI

Measurement of single-phase AC current, isolation transmission output 4-20mA or 0-5V DC signal

RS485-MODBUS(C)

BD-3I3

Measurement of three-phase alternating currents transmission output isolation 4-20mA or 0-5V DC signal

/

Voltage transmitter

BD-AV

Measuring AC voltage isolation transmission output 4-20mA or 0-5V DC signal

RS485-MODBUS(C)

BD-3V3

Three-phase three-wire voltage transmitter, measuring three-phase AC voltage isolation transmission output 4-20mA or 0-5V DC signal

/

BD-4V3

Phase four-wire voltage transmitter, measuring three-phase AC voltage isolation transmission output 4-20mA or 0-5V DC signal

Power transmitter

BD-4EA

Three-Phase four-wire multi-power transmitter, measuring and displaying exports three-phase current, voltage ,active power, reactive power ,frequency ,power factor, active energy; reactive energy and so on, 1~4 channel analog  optional, two channel electric energy

pulse output,RS485-MODBUS

M- Analog output, selectable 1 channel, 2- channel, 3- channel, 4- channel

Frequency transmitter

BD-F

Measure frequency, transmit frequency into linear DC signal output

/

Active power transmitter

BD-3P

Three-Phase 3-wire,Measurement of active power, isolation analog signal transmission output

/

BD-4P

Three-Phase 4-wire,Measurement of active power, isolation analog signal transmission output

/

Reactive power transducer

BD-3Q

Three-Phase 3-wire,Measurement of reactive power, isolation analog signal transmission output

/

BD-4Q

Three-Phase 4-wire,Measurement of reactive power, isolation analog signal transmission output

/

P / Q combination transmitter

BD-3P/Q/I

Three-Phase 3-wire,Measuring current, active power, reactive power, isolate analog signal transmission output

/